The true balanced sub-chassis turntable for the 21st century

A high-end balanced turntable with an iconic design and a perfectly matched MC cartridge. This is how the 6PerspeX Balanced continues the Pro-Ject True Balanced success story!

The transparent acrylic chassis stands on three individually height-adjustable, TPE-damped aluminum cones and supports the motor and sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields. A magnetic sub-chassis suspension system avoids unwanted noise typically caused by conventional spring mechanisms. A quiet-running AC motor unit drives the platter via a belt, and the advanced DC motor control ensures perfect speed stability.

The resonance-optimized platter is a sandwich construction consisting of a finely balanced MDF platter and a 4mm thick vinyl mat. A screw-down record clamp secures the record reliably. The inverted platter bearing consists of a standing stainless steel axle with a ceramic ball, on which a bushing with a ceramic bearing base rotates.

Set including Pick it MC3 for True Balanced Connection

The Pro-Ject MC3 cartridge (RRP 599 Euro), available at a better price in the set with the 6PerspeX Balanced, enables True Balanced signal transmission via the 5-pin mini-XLR output. The Pick it MC3 is an all-purpose cartridge that delivers a powerful and dynamic sound, optimized for pop and rock as well as large orchestral classics. The great advantage of a balanced connection is its ability to remove noise and interference picked up along the way. The Pro-Ject True Balanced cable range offers cables of every class to connect the turntable to the balanced phono preamplifiers Phono Box S3 B, Phono Box DS3 B, or Tube Box DS3 B.

9 CC EVO tonearm

The 6PerspeX Balanced features the high-quality 9-inch CC carbon tonearm. This uses an inverted gimbal ABEC 7 quality bearing with four stainless steel tips. This type of bearing is very stable and low-friction, which ensures clear tracking. The tonearm base is made of solid aluminum. You can adjust both the azimuth and the VTA – both are crucial for getting the best performance out of your cartridge.

Adaptive anti-skating mechanism: The skating force varies between the inner and outer grooves of the record. Therefore, our anti-skating mechanism adjusts accordingly and always remains optimal.
TPE-damped counterweight: The TPE insert decouples the counterweight from the tonearm and reduces resonances.
Gimbal-mounted 4-point tip bearing: The precise gimbal bearing with 4 stainless steel tips has very low friction and offers the best stability.
The medium-weight tonearm is excellently suited for any type of cartridge. The conical tonearm tube and the headshell are made of a single piece of carbon fiber, thus exhibiting high rigidity and low resonance. ABEC 7 quality ball bearings allow the arm tube to move with almost no mechanical resistance. The stylus can thus follow the record groove unimpeded.

High-quality phono cable

Cables are unable to improve the sound of your audio system, but a good cable ensures that every detail and every piece of information in the signal is transmitted to the dedicated receiving device. The included Connect it Phono E RCA is a cable optimized for phono using high-quality materials.

Premium DC/AC power generator

A precise, DC-powered AC generator creates a completely new sine wave for the motor, thus guaranteeing outstanding speed stability.

Drive

Electronic speed selection between 33 and 45 rpm
The transparent acrylic glass chassis stands on three TPE-damped aluminum cones
The sub-chassis made of the composite material Corian (artificial stone) is suspended on magnetic fields
The resonance-optimized platter is a sandwich construction consisting of a finely balanced platter made of compressed wood fibers, a precision-ground mat made of vinyl record material, and a screw-down record clamp
The inverted platter bearing consists of a standing stainless steel axle with a ceramic ball, on which a bushing with a ceramic bearing base rotates
External power supply to protect against mechanical and electromagnetic interference
A transparent, hinged Plexiglas dust cover is included
RCA terminal
5-pin mini-XLR output
Pro-Ject 9cc Evolution tonearm

Straight 9-inch tonearm
Counterweights for cartridges weighing 5 to 7.5 g, 7 to 10 g, 9 to 11 g, and 10 to 14 g included
The conical tonearm tube and the headshell are made of a single piece of carbon fiber
The tonearm tube can be rotated after loosening a screw. This allows horizontal (azimuth) adjustment of the cartridge despite the fixed headshell
The tonearm base offers an adjustment option for the vertical tracking angle (VTA)
Inverted tonearm bearing made of four hardened stainless steel tips mounted in ABEC 7 quality ball bearings
Pro-Ject Connect it Phono RCA-E tonearm cable (length approx. 123 cm) included
Connection

Phono input on the amplifier or external phono preamplifier

Dimensions W x H x D:
460 x 183 x 365 mm, 460 x 420 x 465 mm (lid open)

Weight:
11 kg

Herstellerangaben:

Audio Tuning Sales GmbH
Analog Way 1
A5 Business Park Mistelbach/Wilfersdorf
2130 , Mistelbach
AUSTRIA
info@project-audio.com

Verantwortliche Person:

ATR – Audio Trade HiFi – Sales Company LLC
Wallufer Strasse 2
65343 , Eltville am Rhein
Germany
pro-ject@audiotra.de